OREANDA-NEWS. April 02, 2015. CONSOL Energy (NYSE: CNX) and Halliburton (NYSE: HAL) announced today the planned deployment of the first hydraulic fracturing spread that is fully compliant with the Environmental Protection Agency’s  2015 Tier 4F emissions standard for non-road, high-horsepower engines.  Tier 4F equipment will be used to complete fracturing jobs on all six pads on Pittsburgh International Airport (PIT) property. 

Completions on Pad 2 at PIT commence today with an expected 36% overall reduction in emissions as a result of this new equipment. 

Tim Dugan, CONSOL Energy Chief Operating Officer – Exploration and Production commented, “Given the importance of this project to the entire Pittsburgh region, we are firmly committed to conducting our operations in accordance with the highest safety and environmental standards.  So, we issued a challenge to deliver the lowest-emitting fracturing fleet possible, using the latest technology and Halliburton stepped up to the plate.”  Dugan continued, “We are pleased to team with Halliburton to introduce this industry-first on the PIT project, which is a prime example of the innovation that continues to occur across the Marcellus play, as well as CONSOL’s commitment to going above and beyond the regulatory baseline that governs our operations.”

Halliburton teamed up with Cummins to maximize the use of the Tier 4F engines.  In addition to building a spread that is fully Tier 4F-compliant, Halliburton is also utilizing its existing emissions-reducing technologies on site, including the solar panel-powered SandCastle® PS-2500 Vertical Proppant Storage System.

Richard Gonzalez, vice president of Halliburton’s Production Enhancement business line, said “We hold ourselves to high standards in achieving compliance with environmental regulations. Building a fully Tier 4-compliant fracturing fleet that would meet emissions requirements for the Pittsburgh airport took extensive testing of prototype engines over the past few years.  Halliburton, Cummins and CONSOL Energy all share the same values in developing advanced technology and protecting the environment, and we were proud to partner with them.” 

According to Cummins, compared to engines produced in 2000, the Tier 4F-compliant engines reduce particulate matter by 93 percent and oxides of nitrogen and hydrocarbon by 63 percent.  Halliburton’s fracturing fleets have had 2015 Tier 4F-compliant engines in some of its blending equipment since 2010, and the new engines will power its fracturing pumps to complete the full Tier 4F fleet. 

Ed Pence, vice president of Cummins’ High Horsepower Engine Business said, “We are pleased to partner with Halliburton and CONSOL, pioneering Tier 4 Final very low emissions products into the market.

We are confident the Cummins QSK50 will deliver the reliability and dependability Halliburton and CONSOL expect, while reaching these very low emissions through the use of proven, latest-generation Selective Catalytic Reduction (SCR) after treatment.”

About CONSOL Energy
CONSOL Energy Inc. is a Pittsburgh-based producer of natural gas and coal. The company is one of the largest independent natural gas exploration, development and production companies, with operations centered in the major shale formations of the Appalachian basin. CONSOL Energy deploys an organic growth strategy focused on rapidly developing its resource base. As of December 31, 2014, CONSOL Energy had 6.8 trillion cubic feet equivalent of proved natural gas reserves. The company’s premium coals are sold to electricity generators and steel makers, both domestically and internationally.  CONSOL Energy is a member of the Standard & Poor's 500 Equity Index and the Fortune 500. Additional information can be found at www.consolenergy.com.

About Halliburton
Founded in 1919, Halliburton is one of the world’s largest providers of products and services to the energy industry. With more than 80,000 employees, representing 140 nationalities in approximately 80 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction and completion, and optimizing production through the life of the field. Visit the company’s website at www.halliburton.com. Connect with Halliburton on Facebook, Twitter LinkedIn, Oilpro and YouTube.

About Cummins Inc.
Cummins Inc., a global power leader, is a corporation of complementary business units that design, manufacture, distribute and service diesel and natural gas engines and related technologies, including fuel systems, controls, air handling, filtration, emission solutions and electrical power generation systems. Headquartered in Columbus, Indiana, (USA) Cummins currently employs approximately 54,600 people worldwide and serves customers in approximately 190 countries and territories through a network of approximately 600 company-owned and independent distributor locations and approximately 7,200 dealer locations. Cummins earned \\$1.65 billion on sales of \\$19.2 billion in 2014. Press releases can be found on the Web atwww.cummins.com. Follow Cummins on Twitter at www.twittter.com/cummins and on YouTube atwww.youtube.com/cumminsinc.

Halliburton

Investors:
Kelly Youngblood
Halliburton, Investor Relations
Investors@Halliburton.com
281-871-2688

Media:
Stacia Dickson
Halliburton, Public Relations
PR@Halliburton.com
281-575-4011

CONSOL Energy

Investors:
Tyler Lewis
tylerlewis@consolenergy.com
724-485-3157

Media:
Brian Aiello
brianaiello@consolenergy.com
724-485-3078