06.12.2011, 09:57
Several World Tops for TISCO New BAL Line
OREANDA-NEWS. December 06, 2011. TISCO new-built stainless steel cold rolling BAL line will have several world's tops: mill speed of 1200 meters per hour, plate width of 1650 mm, annual designing production capacity of 130,000 tons. At the same time, compared with the previous production line, BAL furnace can reduce about 40% ~ 60% of the consumption of hydrogen and degreaser, achieving the lowest cost. The project is expected to complete and put into production in the first quarter of 2012, reported the press-centre of TISCO.
Stainless steel bright plate, named mirror plate and BA plate as well, is known as the "crown" of stainless steel by its high requirements of surface quality and the difficult production technology. In recent years, the demand of wide bright plate, especially for ultra-thin and ultra-wide bright plate becomes larger and larger in decoration, home electrical appliances and other industries. The production ability and process equipment of TISCO previous bright line can not satisfy the demand of the market. Therefore, the company made a decision to establish the project preparatory group in 2010, and at the end of January 2011 held the foundation laying ceremony for the project.
The planning total investment of the project is 943 million yuan, all technology and equipment are chosen from the best manufacturers in the industry. Mechanical equipments are supplied by DMS Company and GEORG Company, electrical equipments by ABB China and Siemens Company, bright furnace by Japanese Chugai-Ro Company. There are the most advanced atmosphere purification device and degreasing ultra-filtration system in the bright furnace, hydrogen and degreaser can be recycled, therefore the consumption is the lowest one. After the project putting into production, it might produce high quality cold-rolled bright stainless steel plate with width of 1650 mm and thickness of 0.2 mm to 1.5 mm, realizing the import product substitution, filling domestic blank of wide BA plate, and adding 200 million yuan of sales revenue for the company.
The main body of the project is constructed by MCC 20 and SISCO, which was started in March 12th, 2011 and is respected to be finished and put into production in the first quarter of 2012. In the project, steel structure installation volume will reach to 3000 tons, the height of bright furnace 90 meters, crane height 76m, with big construction difficulty and high quality requirements, by elaborate organization and implementation of the project department and construction department, according to measurement in 60 meters height by SISCO, steel structure deviation is smaller than positive and negative 8 mm. At present, more than half of the project is finished, the seven layers bright tower steel structure installation has completed five layers, and the sixth floor structure is in progress now. It is expected that all steel structure installation can be finished in this year.
Stainless steel bright plate, named mirror plate and BA plate as well, is known as the "crown" of stainless steel by its high requirements of surface quality and the difficult production technology. In recent years, the demand of wide bright plate, especially for ultra-thin and ultra-wide bright plate becomes larger and larger in decoration, home electrical appliances and other industries. The production ability and process equipment of TISCO previous bright line can not satisfy the demand of the market. Therefore, the company made a decision to establish the project preparatory group in 2010, and at the end of January 2011 held the foundation laying ceremony for the project.
The planning total investment of the project is 943 million yuan, all technology and equipment are chosen from the best manufacturers in the industry. Mechanical equipments are supplied by DMS Company and GEORG Company, electrical equipments by ABB China and Siemens Company, bright furnace by Japanese Chugai-Ro Company. There are the most advanced atmosphere purification device and degreasing ultra-filtration system in the bright furnace, hydrogen and degreaser can be recycled, therefore the consumption is the lowest one. After the project putting into production, it might produce high quality cold-rolled bright stainless steel plate with width of 1650 mm and thickness of 0.2 mm to 1.5 mm, realizing the import product substitution, filling domestic blank of wide BA plate, and adding 200 million yuan of sales revenue for the company.
The main body of the project is constructed by MCC 20 and SISCO, which was started in March 12th, 2011 and is respected to be finished and put into production in the first quarter of 2012. In the project, steel structure installation volume will reach to 3000 tons, the height of bright furnace 90 meters, crane height 76m, with big construction difficulty and high quality requirements, by elaborate organization and implementation of the project department and construction department, according to measurement in 60 meters height by SISCO, steel structure deviation is smaller than positive and negative 8 mm. At present, more than half of the project is finished, the seven layers bright tower steel structure installation has completed five layers, and the sixth floor structure is in progress now. It is expected that all steel structure installation can be finished in this year.
Комментарии